This guide explains how to automatically increment serial number markings using EasyCAD. The steps include setting up the text tool, adding variable text, and configuring the serial number parameters.
Step-by-Step Instructions
-
Open EasyCAD and Select the Text Tool
- Open EasyCAD and click on the text tool to begin.
- Type out the text you want to include in your serial number marking.
-
Set the Font
- Choose the desired font for your text from the font settings.
-
Enter Variable Text
- Navigate to the variable text section and click "Add."
- Select "Serial Number" from the options.
-
Configure Serial Number Parameters
- Enter the starting number (e.g., 00001).
- Set the current number to match your starting point.
- Define the limit for the serial numbers (e.g., 20).
- Set the increment value (e.g., 1).
- Click "OK" to apply the settings.
-
Adding a Prefix
- If you need to include text and numbers (e.g., ABC00001), create a separate text box for the prefix.
- Type your prefix in the text box and position it before the variable text.
-
Hatch and Set Parameters
- Select the serial number text and apply hatching if needed.
- Set the appropriate laser parameters for marking.
-
Marking the Serial Numbers
- Use the red line preview to ensure proper alignment.
- Mark the serial number on your material.
- Repeat the process for each subsequent serial number.
Conclusion
Setting up serial number marking in EasyCAD involves configuring variable text and applying the appropriate settings. Follow these steps to automate the incrementation of serial numbers for your projects. For further assistance, refer to EasyCAD documentation or support channels. Happy engraving!