This guide explains how to install Lightburn software on your computer. This is useful if you have purchased a new computer, need to add the software to a second device, or need to reinstall it after a crash.
Step-by-Step Installation Process
-
Download Lightburn
- Open your preferred web browser.
- Type lightburnsoftware.com in the address bar and press Enter.
- On the Lightburn homepage, navigate to the Download/Trial page.
- Select the appropriate version for your system (e.g., Windows 64-bit, Mac, Linux).
-
Download the Installer
- Click on the relevant version to download.
- The download will start and may appear in the top right or bottom left of your browser, depending on your settings.
- Once downloaded, open the installer from your browser or locate it in your Downloads folder.
-
Run the Installer
- Double-click the downloaded file to start the installation.
- The installer will guide you through the setup process.
- Choose whether to create a desktop icon and click Next.
- Click Install to begin the installation.
-
Install Drivers
- During installation, you will be prompted to install drivers.
- For Gantry-style lasers, select the FTDI Serial Driver (used for DSP controllers).
- If using multiple devices, you may also install additional drivers as needed.
- Follow the prompts to complete the driver installation.
-
Complete Installation
- Accept the end-user license agreement.
- Click Finish to complete the installation.
Activating Lightburn
- Activate Your License
- Open Lightburn after installation.
- If prompted, enter your license key and click Activate License.
- Ensure you type the key exactly, including dashes.
Conclusion
Lightburn is now installed and ready to use on your computer. This guide has walked you through the process to ensure a smooth installation. For further assistance, refer to Lightburn documentation or support channels. Happy engraving!