The laptop mount allows you to securely attach your laptop to the CO2 laser machine for convenient operation. This guide explains how to assemble and attach the laptop mount correctly.
Step-by-Step Instructions
-
Identify the Components
- Locate the laptop stand hardware on the back of the base plate. Notice the spring release tab and the U-shape of the lower portion of the hardware.
- Identify the arm of the stand, which also has a U-shape.
-
Assemble the Stand
- Orient the two pieces (the lower portion and the arm) so they slide into each other and lock.
-
Attach the Stand to the Laser
- Insert the arm of the laptop stand into the fixed mount on the laser.
- Secure the stand to the mount using the supplied allen wrench set. Locate the 3mm wrench and tighten the bolt on the fixed mount to secure the stand.
-
Mount the Laptop
- Insert your laptop into the spring clips on each side of the stand.
- Connect the USB cable from the machine to the laptop after it's mounted.
- Tidy up the cord underneath the arm to keep the area organized.
Conclusion
Properly setting up the laptop mount ensures a stable and convenient workstation for operating your CO2 laser. Follow these steps to install and secure your laptop mount. For further assistance, refer to Lightburn documentation or support channels. Happy designing!