Installing Lightburn for CO2 Lasers

This guide explains how to install Lightburn software on your computer. This is useful if you have purchased a new computer, need to add the software to a second device, or need to reinstall it after a crash.

Step-by-Step Installation Process

1. Download Lightburn

   • Open your preferred web browser.
   • Type lightburnsoftware.com in the address bar and press Enter.
   • On the Lightburn homepage, navigate to the Download/Trial page.
   • Select the appropriate version for your system (e.g., Windows 64-bit, Mac, Linux).

2. Download the Installer

   • Click on the relevant version to download.
   • The download will start and may appear in the top right or bottom left of your browser, depending on your settings.
   • Once downloaded, open the installer from your browser or locate it in your Downloads folder.

3. Run the Installer

   • Double-click the downloaded file to start the installation.
   • The installer will guide you through the setup process.
   • Choose whether to create a desktop icon and click Next.
   • Click Install to begin the installation.

4. Install Drivers

   • During installation, you will be prompted to install drivers.
   • For Gantry-style lasers, select the FTDI Serial Driver (used for DSP controllers).
   • If using multiple devices, you may also install additional drivers as needed.
   • Follow the prompts to complete the driver installation.

5. Complete Installation

   • Accept the end-user license agreement.
   • Click Finish to complete the installation.

Activating Lightburn

1. Activate Your License
   • Open Lightburn after installation.
   • If prompted, enter your license key and click Activate License.
   • Ensure you type the key exactly, including dashes.

Conclusion

Lightburn is now installed and ready to use on your computer. This guide has walked you through the process to ensure a smooth installation. For further assistance, refer to Lightburn documentation or support channels. Happy engraving!